Panel Integration

How to connect an Argon panel and automate your billing

Connect your Argon reseller panel with its address and X-ApiKey, pick a content template, and let paid orders create and renew lines by themselves.

5 min read
Published November 2, 2026
Last checked November 18, 2026
argon
panel
provisioning
api-key

Once your Argon panel is connected, a paid order creates the customer's line on it and a renewal extends that same line. Every line gets the content template you choose, and your credit balance is read from the panel.

Argon is reseller software that some providers run under their own brand name. If your panel calls itself something else but your provider says it runs on Argon, this is the right guide. Argon connects through its reseller API with one key, the X-ApiKey from your reseller area. There is no browser login and no captcha.

Before you start: Copy your X-ApiKey from your Argon reseller area, note your panel's address, and create at least one content template in your Argon panel. Also have the address your customers' apps connect to (your stream URL).

1Step 1 of 5Open the panel picker

Go to Panels → All panels and click Add panel. The page scrolls down to Add New Panel. Type "argon" in the search box and click the Argon tile. A window opens with the connection form. If your plan's panel limit is reached, you're asked to upgrade first.

You can also click Detect my panel, paste your login address, click Detect panel and then Use this next to the best guess.

2Step 2 of 5Fill in the form

  • Display Name: any name you'll recognise.
  • Stream URL: the address your customers' apps connect to. Customers' playlist, portal and EPG links are built from it.
  • Panel URL: your panel's main address, for example https://reseller-panel.example. If you paste it with /api or /api/v1 at the end, that part is removed.
  • API Key: your X-ApiKey from the reseller area.

If a browser pop-up asks for a username and password before your panel even loads, tick This panel is behind an nginx / login gate and enter that gate's username and password.

3Step 3 of 5Add the panel

Click Add Panel. Your store reads your credit balance with the key before anything is saved. If it fails, you see Panel not saved with what went wrong, and nothing is saved.

4Step 4 of 5Check the connection

On the panel's page, Connection Status should show Connected. Click Test Connection at any time. Your credit balance is read from the panel.

5Step 5 of 5Create a product

The panel's page shows Create a product. Click it to open Quick setup from panel and click Fetch packages.

Argon's API has no package list, so your store offers Argon's fixed lengths: 1, 3, 6 and 12 months, plus a 24-hour and a 3-hour test for trials.

  1. Under Your combined product, pick your template in Content template (Argon). The template decides what content a line gets on Argon. If the list is empty, create a template in your Argon panel first, then fetch again.
  2. Tick each Duration tier you sell and enter its Base price.
  3. To offer a trial, tick the 24-hour or 3-hour test under Free trials.
  4. Click Create product.

Argon creates username-and-password lines only. On your Argon products, untick MAC Address (MAG) under Allowed Authentication Types, so customers aren't offered a MAC address option at checkout.

What works with Argon

  • New lines and renewals: created and extended automatically after payment. A renewal extends the same line, and your store reads the new end date back from Argon.
  • Usernames: your store sends the customer's username and password when the order has them; otherwise Argon makes them.
  • Content: the content template you chose for the product.
  • Credits: your balance is read from the panel and checked before each paid order. With too few credits, the order waits until you top up.
  • Free trials: the 24-hour or 3-hour test, without a credit check. Argon itself may refuse trials on an account with no credits.
  • Line end: your store doesn't switch Argon lines off. A line that isn't renewed runs out on the panel at its end date.

Common problems

The API key is rejected. Copy the X-ApiKey again from your reseller area. Your login password is not the key.

The panel returned a web page. The Panel URL doesn't point to the reseller API. Use the panel's main address and check the key.

"No templates found — create one in your Argon panel first." Your account has no content template yet, or the key can't read it. Create a template on Argon and click Fetch packages again.

"You can't create trials on a zero-credited account." This is Argon's own message: your account needs credits before it hands out trials.

More messages are in Fix a panel that won't connect.

Frequently asked questions

My panel is called something else. Is it Argon?

Some providers run Argon under their own name. If your provider says the panel is Argon-based, or your reseller area gives you an X-ApiKey for an /api/v1 API, choose the Argon tile. Not sure? Use Detect my panel with the address you log in at.

What is a content template on Argon?

A template is a channel selection you build in your Argon panel. Your store gives every line of a product the template you picked in Content template (Argon), so customers get exactly that content.

Which lengths can I sell on Argon?

1, 3, 6 and 12 months, plus 24-hour and 3-hour tests for trials. These are Argon's fixed packages; set your own price for each.

Can I sell to MAG boxes on Argon?

No. Your store creates username-and-password lines on Argon only. Untick MAC Address (MAG) on your Argon products.

What happens when a customer doesn't renew?

Nothing is sent to Argon: the line runs out on the panel at its end date. The subscription waits for payment during your grace period, and the customer gets a link to renew. See How renewals work.

Ready to try it yourself?

Spin up your own IPTVbp store and connect a panel. It's free until you have 25 paying customers, no card needed.

Start free trial